Kargo-master Single Drop Down Ladder Rack – Transit/NV Low Roof Instrukcja Użytkownika

40923 Parts List Front Bow Assy.(1) Rear Bow Assy.(1)

Step 9 Next attach the “Ladder Hooks” and “Ladder Stops”. Attach "Ladder Hooks" to ladder pans on 5/16” studs in desired location. Attach &q

Rear bow location for step ladder. 9

Step 10 Attach ladder pan stiffener, in the closed position, using 5/16”x5/8” bolts with lock and flat washers. Confirm that distance between passenge

Completed Install setup for a "Step Ladder". 11

12

7RROV1HHGHG +DUGZDUH3DFN&RQW+DUZDUH/LVW7DSH0HDVXUH (QG:UHQFK J6RFNHW (QG:UHQFK 4W\6RFNHW +DPPHU 

40923 Installation Instructions Step 1 - Mounting Rails-2015 Ford Transit First mount the rear "Mounting Bracket" with M8x30MM bolts as s

40923 Installation Instructions Step 1͘Ϯ - Mounting Rails-Nissan NV First install the M8 U-Nuts as shown. Then mount the "Short Mounting Rail&

Step 2 Measure width of the mounting rail and bolt feet to bows at that approximate location as shown, DO NOT TIGHTEN at this point. Step 3 Attach th

Step 5 Place “Rear Bow Assy.” as shown and bolt to rails using 5/16”x1” bolts with nyloc nuts and flat washers, DO NOT TIGHTEN at this time. 4

Step 6 Place “Front Bow Assy.” as shown and bolt to rails using 5/16”x1” bolts with nyloc nuts and flat washers, DO NOT TIGHTEN at this time. 5

Step 7 Attach torque tube using ¼” bolts with flat washers and nylock nuts. Check distance between feet on both driver and passenger side, they must b

Step 8 Next attach the "Handle Assy." as shown using 5/16"x2" bolt with flat washers and nyloc nuts. 7