Kargo-master SINGLE Drop Down Ladder Rack New / Old Transit Con Instrukcja Użytkownika

40933 Parts List Front Bow Assy. (1) Rear Bow Assy. (1)

Step 10 Next attach the “Ladder Hooks” and “Ladder Stops”. The first 4 pictures show the front hooks, the next 4 show the rear hook set in the “step

Rear bow location for step ladder. 11

Installation complete for “step ladder”. Installation complete for “extension ladder”. 12

Hardware Pack Cont' (i) Qty 4 - 5/16"-18 x 1" Hex Bolt (j) Qty 8 - 3/8"-16 x 3/4" Hex Bol

Step 1 Mount rail to roof using M8x25 Bolts with flat and lock washers (on 2014 Transit Connect use nyloc nut with fender washer and rubber washer-Do

Step 3 Bolt “Latch” as shown using 5/16”x3/4” carriage bolts with nyloc nuts and flat washers. Step 4 Next bolt the Angle bracket on the driver sid

Step 5 Place “Rear Bow Assy.” as shown and bolt to rails using 5/16”x1” bolts with nyloc nuts and flat washers, DO NOT TIGHTEN at this time.

Step 6 Place “Front Bow Assy.” as shown and bolt to rails using 5/16”x1” bolts with nyloc nuts and flat washers, DO NOT TIGHTEN at this time. 6

Step 7 Bolt the “Torque Tube” using ¼”x7/8” bolt with nyloc nut and flat washers. This sets the distance between the front and rear assembly (71.5” c

Step 8 Next bolt the “Handle Assy.” Using 5/16”x2” bolts with a nyloc nut and flat washers as shown. BE SURE HANDLE WILL CLEAR THE REAR DOORS during

Step 9 Next attach the “Ladder Pan Stiffener” using 5/16”x5/8” bolt with lock washers and flat washers as shown. With that completed you can now go b